Off Grid Solar Power Plant Manufacturers in Madhya Pradesh

Minimum Power output of PV Module	: 75 Wp
PV Module type	: Crystalline Silicon Terrestrial Photovoltaic (PV) modules
Minimum effieiency of PV Module (in %)	: 14
Battery voltage, Minimum (in Volts)	: 12.8
Battery capacity, Minimum (in Ah)	: 30
Battery type	: Lithium Ferro Phosphate
Battery enclosure	: External enclosure with IP65 Proection
Rating	: 12 Watt
Total luminous flux	: ≥ 1500 lm.
Luminous efficacy (i.e. system efficacy)	: ≥ 125 lm/W.
Color Temperature	: 5500 K to 6500 K
Overall total Efficiency of the Electronics	: >/=90%
Ingress Protection (IP) for Optical and Control gear compartment	: IP 66

Power output of PV Module	: ≥ 75 Wp at 16.4 ±0.2 Volt at STC
Battery capacity	: ≥ 12.8 V (nominal), 30 Ah at STC (1 day autonomy)
Type of LED (Light source)	: 25 Watt White LED type
Ingress protection	: IP65 or better
Indicators on the system	: Provided with 2 LED indicators: a green light to indicate charging in progress and a red LED to indicate deep discharge condition of the battery. The green LED glow only when the battery is actually being charged.
Nominal bore size of tube / Thickness of tube	: 65 mm / 3.6 mm
Height of pole (in m)	: 7
Battery box	: Outside the luminaire enclosure in a vented, acid proof and corrosion resistant, hot dip galvanized metallic box (IP65 or better) with anti-theft locking arrangement for outdoor use

Minimum Power output of PV Module	: 75 Wp
PV Module type	: Crystalline Silicon Terrestrial Photovoltaic (PV) modules
Minimum effieiency of PV Module (in %)	: 14
Battery voltage, Minimum (in Volts)	: 12.8
Battery capacity, Minimum (in Ah)	: 30
Battery type	: Lithium Ferro Phosphate
Battery enclosure	: External enclosure with IP65 Proection
Rating	: 12 Watt
Total luminous flux	: ≥ 1500 lm.
Luminous efficacy (i.e. system efficacy)	: ≥ 125 lm/W.
Color Temperature	: 5500 K to 6500 K
Overall total Efficiency of the Electronics	: >/=90%
Ingress Protection (IP) for Optical and Control gear compartment	: IP 66

LED Rating (in Watts)/System Wattage/Rated Power	: 120W
Luminaire System Efficacy (Lumen/watt	: >/= 100 Lm/Watt
Ingress Protection (IP Rating) as per IS:10322 (Part 1):1982 latest	: IP66
Warranty for free replacement (in years)	: 2
Input operating Voltage range and frequency	: 140 to 270 V olts AC at 50 Hz+/-2 with auto cutt off at below 120V
LED chip Efficacy	: ≥130 Lm/Watt
Heat sink should be die-cast aluminium along with sufficient heat sink fins to dissipate heat effectively	: Yes
Operating temperature range	: -10 deg C to +55 deg C
Short circuit Protection	: Yes
Over load protecton	: Yes
Over Voltage protection	: Yes
Reverse polarity	: Yes
The luminaire shall be protected against surges and transients ( Internal)	: >/=5KV
Protection of the entire housing (both LED section and driver section) as per IS:10322 (Part 1):1982 latest	: IP66
Number of electronic control gear (power supplies)	: 2 Nos.
Light Source	: SMD LED Chip as per LM 80/IS16106
Length of ISI marked three core wire (shall be provided along with supply of material)	: 50 cm
"Manufactures Name and and brand on the aluminium die cast body "	: Engraved/Embossed
LED Make	: OSRAM / NICHIA / CREE / SAMSUNG / SEOUL / LUMILEDS / PHILIPS / SYSKA / LUMENMAX / EVERLIGHT / EDISON / BRIDGELUX / NATIONSTAR / REFOND
LM 79 (Photometry) (Ref.IS:16106:2012) report from Central Government Lab /NABL/ILAC accrediated lab. Reports shall be furnish to the buyer / consignee on demand (LM-79 report shall have total lumen output, power, PF, Current in Amps, CRI & CCT etc.,	: Yes
LM 80 & TM 21 (Ref. IS:16105:2012) Report and Photo biological report for LED report from Central Government Lab /NABL/ILAC accrediated lab. Reports shall be furnish to the buyer / consignee on demand (LM-80 report shall have the Pohoto Biological re	: Yes
Availability of test Report from Central Government Lab /NABL/ILAC accrediated lab to Indian Standrad IS:10322/part 5/sec-3/2012 and IS 16107 (Part 2/Sec 1) : 2012	: Yes
Seller shall furnish the Type test reports to the buyer / consignee on demand	: Yes